Success Story

Renishaw gets better fit and impedance control for complex flexible PCBs in metrology instruments using CR-8000

Renishaw logoFlexible and flexi-rigid PCBs are integral components within many of Renishaw’s products, and detailed signal integrity analysis is needed to ensure high speed digital signals can be transmitted with minimal distortion. Renishaw migrated to Design Gateway and Design Force, part of Zuken’s CR-8000 PCB design suite, primarily to help with the design and analysis of next-generation flexible PCBs.

Working in 3D for the first time, Renishaw’s PCB designers noticed a host of benefits, including fixing housing fit issues upfront and easier component placement. They also boosted their controlled impedance routing for high frequency signals using electromagnetic field solvers in Design Force. Working in 3D has enhanced collaborative engineering within Renishaw.


  • Flexible PCB and housing fit issues are fixed early in the design flow due to enhanced collaboration between electronic and mechanical design, saving considerable time
  • Easier controlled impedance routing for high frequency signals using electromagnetic field solvers in Design Force
  • 3D placement means PCB designers can create the ‘perfect’ layout.
  • ‘What if’ scenarios can be viewed by bending the flexible PCB.

About Renishaw

Renishaw is one of the world’s leading engineering and scientific technology companies and has particular expertise in metrology equipment used, for example, to improve manufacturing processes. Throughout its 40-plus-year history, Renishaw has introduced products and technologies that are now acknowledged as breakthroughs in industrial metrology, and its latest 5-axis measurement product range delivers unprecedented speed and flexibility. Testament to its commitment to innovation, Renishaw was named NMI Company of the Year 2016.

Renishaw Revo and Vionic
Flexi for Encoder
Designed recently for a new encoder, the above flexible PCB is about 8cm long and is required to bend in several places.

Flexi Fit

Many of Renishaw’s metrology products include sub-assemblies that contain (pure) flexi or flexi-rigid Printed Circuit Board Assemblies (PCBAs). Of these, flexi-rigid PCBAs can be a particularly challenging proposition from a design perspective, as they can include several rigid PCBAs and typically need to wrap around – or fit within – complex and volume-constrained mechanical assemblies. Such flexi-rigids tend to be non-dynamic, ‘fit-once’ PCBAs (see figure 1).

In other cases, flexis are needed to establish electrical connections between parts of the instrument that move relative to one another. They need to be dynamic and flex frequently whilst the instrument is working.

Read more

Historically, the design of flexis and flexi- rigid PCBAs has been a predominantly 2D exercise for Renishaw’s PCB designers. They would accept a 2D board outline from the mechanical designer engineers (working in 3D) and – following PCB place and route – return the design with skyline information to the mechanical engineers, who then fold the flexible / flexi-rigid PCB in their 3D environment. However, since migrating to Zuken’s Design Gateway and Design Force, tools within Zuken’s CR-8000 PCB design platform, Renishaw’s PCB designers can now work in 3D.

Renishaw has been using Zuken products since 2000, and in 2016 the company made the decision to migrate from System Designer and Board Designer (tools within Zuken’s CR-5000 platform) to Design Gateway and Design Force, tools within Zuken’s CR-8000 advanced EDA design platform, for schematic capture and PCB layout respectively.

A major benefit of the migration to CR-8000 is that Renishaw’s PCB designers have the ability to visualize and manipulate board designs in 3D. Pete Leonard, Electronic Design Manager for Group Engineering, Renishaw, comments: “We can place components in a 3D environment, taking into account any constraints that may have come over from our mechanical engineers, and then switch back to 2D for routing.

3D Visualization

The ability to work in 3D is particularly useful for Renishaw’s PCB designers when considering flexible and flexi-rigid PCBs; a task the company has to perform throughout the year to support new product introductions.

During the design of the flexible PCB shown in figure 2, Renishaw’s PCB designers created a user-defined layer called ‘BendLine’ (a case- sensitive reserved name). On this BendLine layer, polylines were drawn to represent the axes around which the flexible PCB needs to bend. Properties such as bend direction, angle and radius were then applied to each of the polylines. Note: this activity can be done in either 2D or 3D mode, but if done in 3D a refresh will show the flexi in its bent format (see figure 3).

Renishaw’s PCB designers were then able to move components around in this 3D environment. They were also able to import (via .stp file) the housing around which the flexible PCB must bend (see figure 4).

Read More

“Historically our PCB designers have not had sight of the housing in their design environment,” adds Leonard. “Now they can visualise how it all fits and both they and our mechanical design engineers can see if any clashes occur. This allows us to identify and fix any integration issues early on in the development lifecycle – which is when they are easier and less costly to fix.”

It is also anticipated that Renishaw’s PCB designers will soon be exporting .stp files to the mechanical design engineers. Leonard continues: “They’ll be able see the orientations, locations and sizes of mounted components. They’d also have the authority to position certain features, such as voids, in the housing that may aid the PCB designers with component placements.”

Flexi design
The flexi design wrapped around the housing (imported from a mechanical design engineer’s system).
Dynamic flexible PCB
A cross section of non-dynamic flexible PCB. A bend neutral axis runs through the centre of the substrate (not shown).

Controlled Impedance

The ability to work in a 3D environment is also helping Renishaw’s PCB designers construct controlled impedance flexible circuits. Adrian Welsford, Renishaw’s Principal Design Engineer for signal integrity, comments: “Controlled impedance routing is a prerequisite for good digital circuit signal integrity, and signals – particularly high frequency ones – require constant characteristic impedance from driver to receiver.”

The impedance of a flexible PCB’s track is derived from the ratio of its inductance and capacitance, properties which are themselves derived from conductor dimensions, the space between conductors and the strength of the electric and magnetic fields surrounding the wire/track. To this end, Renishaw’s PCB designers can employ the field solvers within Design Force.

For non-dynamic flexible PCBs requiring controlled impedance tracks, these are formed by sandwiching tracks and a ground plane between layers of polyimide. In figure 5, the polyimide substrate between the reference plane (0V ref Cu) and the signal track (Signal Cu) can be thought of as the dielectric layer of a capacitor. Also taken into account by the solvers within Design Force are the polyimide top coverlay and the air above, as anything below the reference plane (0V ref Cu) can be ignored. Subject to their proximity, the copper fills (0V Cu fill) may also need to be included within the solver’s calculations.

Read More

“As the flexi bends the copper tracks and reference plane will be subjected to forces of compression or tension,” explains Welsford. “Our PCB designers therefore endeavour to leave as much copper on the routing (signal track) layer as possible to ensure the compression and tension forces are equal, thus minimising the risk of inner conductor creasing. Also, there’s an advantage in having fairly thick copper tracks, fills and planes if the non-dynamic flexi is to maintain its profile without support once it’s bent.”

For dynamic flexible PCBs, only a single layer of copper is allowed (see figure 6). Also, in order to assure a long flex life through reduced bend stress, the copper tracks and fills need to be thin. However, in reducing the thickness of signal tracks it is frequently necessary to increase their widths; and it can soon become difficult to maintain gaps between tracks to ensure a 50 Ohm impedance.

Welsford adds: “In some instances it is necessary to design the flexi with higher than normal track impedances and to adjust rigid PCB tracks, drivers and receivers by way of impedance matching.”

Renishaw is currently using two tools from Zuken’s CR-5000 suite for controlling impedance. Constraint Manager is used to specify the limits of characteristic impedance and Lightning is used to create impedance templates. “This allows us to select a group of nets, using a net class, and then use the field solver to automatically calculate the impedance specified – adjusting the track widths to match,” explains Welsford. He adds that Renishaw plans to start using tools within the CR-8000 suite for impedance control.


Case Study: Renishaw gets better fit and impedance control for complex flexible PCBs in metrology instruments using CR-8000

Working in 3D for the first time, Renishaw’s PCB designers noticed a host of benefits, including fixing housing fit issues upfront and easier component placement.