surprised-at-discovery-1510x731

What’s New in CR-8000 2018

Front-loading of design intent and enhanced auto/interactive placement and routing boost performance, quality and manufacturability.

Zuken’s CR-8000, the industry’s only product-centric design solution, continues to lead the way with next-generation tools capable of creating today’s and tomorrow’s complex product designs.

PCB Design - CR8000

Performance, quality and manufacturability

CR-8000 2018 has numerous enhancements aimed at ensuring performance, quality and manufacturability for today’s most advanced PCB technologies. These include enabling efficient front-loading of design constraints and specifications to the design creation process, coupled with sophisticated placement and routing capabilities for physical layout. This will increase efficiency and ensure quality through streamlined collaboration across the PCB design chain.


Design Gateway

Constraint Browser

Front-loading of design intent from Design Gateway to Design Force has been achieved by adding an enhanced, unified constraint browser for both applications. This enables hardware engineers to assign topology templates, modify differential signals and assign clearance classes to individual signals.

Rule Stack Editor

Using a rule stack editor during the circuit design phase, hardware engineers can now load design rules that include differential pair routing and routing width stacks directly from the design rule library into their schematic. Here they can modify and assign selected rules for improved cross talk and differential pair control.

Enhanced variant handling

In the Component Browser, component variants can be managed in the schematic, and assigned in a user-friendly table.

CR-8000-2018-5-DestinationVariation
Parts filtered in the design variation list can be displayed and their properties can be compared.


Design Force

Auto Complete & Route

Manual routing of critical areas is backed up by a new Auto Complete & Route function that layout designers can use to complete manually routed traces in an automated way. Designers also have the option to look for paths on different layers while automatically inserting vias.

CR-8000-2018-6-TrackSnapping

Bus Routing

A new bus routing function allows layout designers to sketch paths for multiple nets to be routed over dense areas. An added benefit is the routing of individual signals to the correct signal length as per the hardware engineer’s front loaded constraints, to meet timing skew and budgets.

Re-route with connected components

If modifications to fully placed and routed boards are required, an automatic re-route function allows connected component pins to remain connected with a simple reroute operation during the move process. In all operations, clearance and signal length specifications are automatically controlled and adjusted by powerful algorithms.

CR-8000-2018-8-ReRoute

Vias in poured conductive areas

To address manufacturing requirements for high-speed design, the automatic stitching of vias in poured conductive areas can be specified in comprehensive detail, i.e., inside area online, perimeter outline or both inside and perimeter.


CR-8000-2018-9-CopperVia

Checks extended to non-conductor items

Design-for-manufacturing (DFM) has been enhanced to include checks for non-conductor items, such as silkscreen and assembly drawing placed reference designators. A design rule check will make sure component reference designators are listed in the same order as the parts for visual inspection accuracy.

CR-8000-2018-10-RefDesigatorCheck

3D PDF support

Design Force now supports creation of PRC files commonly used for 3D printing. The PRC files can be opened in PDF authoring applications such as Adobe Acrobat ®, where they are realized as a 3D PDF file complete with 3D models and bookmarks to browse the design.

CR-8000 - Design Force: 3D PDF support
CR-8000 – Design Force: 3D PDF support